Pole-34

COMING SOON (ETA May, 2024)

FREE SHIPPING *

*Additional charges apply for shipping beyond the contiguous United States.

Contact CatScapes if you would like help placing your order.

PLEASE NOTE THE TERMS & CONDITIONS , Note that our climbing poles are new and still in an experimental phase. The introductory pricing allows you early access to this exciting and engaging product but is designated for research & development and therefor non-refundable .

Using the unique, patented CatScapes hinge-brackets, CatScapes Climbing Poles can connect with other CatScapes poles and shelves and positioned at any angle. The more interconnected spans, and the steeper the angles, the higher the weight limit. Though optimal to install onto studs where possible, the weight limit ranges from 30 to over 60lbs off-stud using the provided wall anchors!

The climbing poles have an approximate outer-diameter of 5" and come in lengths of 26", 34", and 42". The lengths refer to the carpeted, cylindrical portion of the pole. The wooden "spine" of the pole that attaches to the brackets extends an additional ~2.5" in both directions. The outer-diameter of the brackets' wall-plates add an additional 1.5", all of which is important to consider when designing your catscape in or close to corners and molding.

Notes:

The poles can be positioned an equal distance from the wall at both ends or closer to the wall on one end and farther from the wall at the other end.

Like rotating your tires, the pole can be rotated upon occasion so that wear is distributed around the pole more evenly.

The tube is wrapped in the same carpet as the shelves. Custom colors are available for an additional charge. Custom carpet color has a minimum order requirement of 7 spans / 14 linear feet.

There is no minimum order requirement for CatScapes climbing poles, but CatScapes poles and shelves are meant to be interconnected for structural stability and to provide the cats with contiguous configurations for fluid movement. Whether it is one span or one hundred spans, make sure you select an end-bracket to "tie-off" any given configuration.

All of the components can be assembled, disassembled, re-assembled, and replaced with an Allen key for easy cleaning, refreshing, and updating.

Benefit from our years of experience by engaging our design expertise . Design fees are determined based on the scope of your project. To get started, Contact us !

Go to Storefront